# RubberOrca > Single-chip ESP32-S3 firmware exposing a wired USB-OTG composite HID keyboard, mouse, and consumer control interface while accepting wireless commands over BLE 5.0 GATT (Service 0xFFE0 / Characteristic 0xFFE1) and USB CDC Serial. ## Highlights - **Supported Hardware:** ESP32-S3 Super Mini (`lolin_s3_mini`, 4 MB Flash / 2 MB PSRAM) and ESP32-S3 N16R8 DevKitC (`esp32-s3-devkitc1-n16r8`, 16 MB Flash / 8 MB OPI PSRAM). - **Host Stealth:** Appears strictly as a wired USB HID device to the target host with no host-side Bluetooth pairing. - **Protocol:** RubberOtter v1 framed `STX/ETX` XOR protocol, 6-byte ACK responses, single-byte fallback commands (`0x11`–`0x85`), `&&`/`;` command chaining, 16 NVS macro slots (`m0`–`m15`), optional 6-digit static BLE passkey bonding, and UTF-8 Turkish Q + US keyboard layouts. - **Python Ecosystem (`brew install AtaCanYmc/tap/rubberorca` or `pip install rubberorca`):** Unified Python SDK (`RubberOrca`), CLI (`rubberorca`), and stdio JSON-RPC 2.0 MCP server (`rubberorca-mcp`). ## Links - Web Serial Flasher: https://atacanymc.github.io/RubberOrca/ - Repository: https://github.com/AtaCanYmc/RubberOrca - Releases: https://github.com/AtaCanYmc/RubberOrca/releases - Architecture: https://github.com/AtaCanYmc/RubberOrca/blob/main/docs/architecture.md - Hardware Guide: https://github.com/AtaCanYmc/RubberOrca/blob/main/docs/hardware.md - Wire Protocol: https://github.com/AtaCanYmc/RubberOrca/blob/main/docs/protocol.md - CLI, SDK, and MCP Reference: https://github.com/AtaCanYmc/RubberOrca/blob/main/docs/cli-and-mcp.md